The safety grating safety light curtain we purchased is mainly used in various punching machines and machinery. However, our customers found that we do not install safety gratings after purchasing safety gratings. In fact, the safety of photoelectric protection devices is relatively simple and not as difficult as we imagine. Generally speaking, our safety gratings in Xaori are accompanied by detailed installation instructions when shipped, The editor will also briefly introduce the installation steps of the safety grating.

Firstly, our general safety light curtain has an installation bracket (one set for each tubular bracket and L-shaped bracket), a pair of installation screws, a pair of gratings, a pair of connecting wires, a manual, and a controller (this is an optional accessory). Generally, we will go through inspections by four departments before shipping. After receiving the grating, you can check whether so many goods have been shipped.

In fact, installing a safety grating is a process of drilling holes. Generally, before installation, we need to drill holes in the installation position to fix the installation bracket, and then fix the grating on the bracket and connect the corresponding connecting wires. The other end of the connecting wire needs to be connected to the mechanical control circuit. After the installation is completed, it should be turned on to test whether all functions are normal and stable, and then it will be OK.